climbtech-catheader-precast-1875x

ClimbTech EVO Anchor

The EVO is a variant on our popular removable bolts utilizing a remote grip system (RGS).
The RGS allows the worker to install the anchor before leaving the safety of the ground. The RGS
can be used to retrieve the anchor from the ground after the job is done. The EVO system requires
pre-installed receptacle that are cast-in place during construction of the structure.

EVO ANCHOR

EVO-ANC

Wood Decking Kit EVO100S-911

Metal Decking Kit EVO100S-912

Key Features: The EVO is a variant on our popular removable bolts utilizing a remote grip system (RGS). The RGS allows the worker to install the anchor before leaving the safety of the ground. The RGS can be used to retrieve the anchor from the ground after the job is done. The EVO system requires pre-installed receptacle that are cast-in place during construction of the structure.
  • Remote Grip System (RGS)
  • Breaking Strength of 5,000 lbf/22kn
  • Complies with both ANSI z359.1-07, ANSI A10.32-12, OSHA 1926 subpart M & OSHA 1910

Straight Loop Insert

ClimbTech - Straight Loop Insert Installation

STRAIGHT LOOP INSERT

Model STL625C-ZNO-WKT

Key Features: The Straight Loop Insert is a pre-installed receptacle that is cast-in place during construction of the surface for the purpose of attaching an ANSI/OSHA certified anchorage connector once the concrete is cured to at least 3000psi.
  • Mechanical alternative to concrete anchor web straps
  • Breaking Strength of 10,000 lbs
  • Complies with both OSHA 1910.66 and OSHA 1926.502 and compatible with ANSI rated anchorage connectors
  • Easily identifiable due to the orange housing

DUAL EXTENDED SWIVEL ANCHOR

Model SWD100N-036

Key Features: This system combines the toughness and versatility of our best selling 10K swivel anchor and our swivel end slings to create a solution for two workers to use the same anchor point without the potential for cross loading the connectors 
  • Removable and reusable
  • Breaking Strength of 5,000 lbs (22kn)
  • Complies with both ANSI z359 & OSHA 29 CFR
  • Made with Aircraft Cable, Zinc Plated Steel, and Polyurethane